Congratulations on receiving your new B1! Use this guide to learn about pairing B1 with your preferred device, charging the battery, and restoring the headset to its factory settings.
What's included in the box
- B1 headset
- Magnetic charger
- Microfiber cloth
- Owners manual
- Warnings Manual
Turning B1 on or off
You can use the right button to power the headset on or off. Do this by holding the right button control for 3 seconds until you hear the audio feedback 🔈 On.
Similarly, hold the right button control for 6 seconds until you hear the audio feedback 🔈 Off.
Pairing with a device
Hold the right button control for 3 seconds until you hear the audio feedback 🔈 On. Open the Bluetooth settings on your device and wait for B1 and the device to locate each other, then select Sudio B1 when it appears in the list. You will hear 🔈 Connected, confirming that the devices are paired with each other!
Charging the battery
There is one battery in total on B1.
The B1 headset is charged with a magnetic charger. When the headset is charging, you will see a light on the side of the headset.
Restoring B1 to its factory settings
If B1 is behaving unexpectedly or you simply wish to restore it to its original settings, reset it by pressing both buttons on the headset for 5 seconds.
You may then proceed with pairing B1 again.
Comments
Article is closed for comments.