Congratulations on receiving your new pair of Nio! Use this guide to learn about pairing Nio with your preferred device, charging the batteries, and restoring the earphones to their factory settings.
What's included in the box
- Nio wireless earphones and charging case
- Interchangeable ear tips in four different sizes: XS, S, M & L
- Type-C USB-cable
- Owners manual
Before getting started
⚠️ Sudio Nio is delivered with a protective film covering the charging connectors between the earbuds and charging case. The film needs to be removed in order for the earbuds to charge.
The earbuds will likely have some existing battery charge, however it is recommended to fully charge Nio before using it for the first time.
Turning Nio on or off
Nio powers up as soon as the earbuds are removed from the charging case, as indicated by the LED lights on the earbuds and the audio feedback 🔈 Power On.
Similarly, Nio is turned off when placing the earbuds back into the case.
You can also use the touch controls to power the earbuds on or off. Do this by holding the touch control for 7 seconds on either earbud.
Pairing with a device
Nio enters pairing mode when the earbuds are removed from the charging case. Open the Bluetooth settings on your device and wait for Nio and the device to locate each other, then select Sudio Nio when it appears in the list. You will hear 🔈 Pairing Successful, confirming that the devices are paired with each other!
Charging the batteries
There are three batteries in total on Nio; one in the charging case and one in each earbud.
The Nio earbuds charge their batteries automatically when placed inside the charging case, this is indicated by the LED lights on the earbuds. Make sure to first remove the protective film which is covering the charging connectors.
The Nio case is charged with a Type-C USB-cable. When the case is charging, you will see a light below the Sudio logo. It is recommended to use the Sudio Type-C USB-cable that's included in the package, but the charging case may be compatible with third-party Type-C USB-cables as well.
Restoring Nio to factory settings
If Nio is behaving unexpectedly or you simply wish to restore it to its original settings, reset it by placing the earbuds inside the case, closing the lid, and pressing the button on the bottom side of the case for 3 seconds.
You may then proceed with pairing Nio again.
Comments
Article is closed for comments.