Skip to main content

Klar - User Guide - First-time setup

AXVZX_mg.jpeg

Congratulations on receiving your new pair of Klar! Use this guide to learn about pairing Klar with your preferred device and charging the battery.

What's included in the box

BmR20fQw.jpeg

  • Klar headphones
  • Micro-USB cable
  • An auxiliary cord
  • Owners manual

Before getting started

The headphones will likely have some existing battery charge, however it is recommended to fully charge Klar before using it for the first time.  

Turning Klar on or off

Press (hold) the middle button for five seconds until the blue light is blinking to power on your Klar.

If you want to turn off your Klar then press (hold) the middle button for five seconds until the blue light turns off.

Pairing with a device

mceclip0__2_.png

Jump to complete guide

Hold the middle button on your Klar for 5-8 seconds. The first blue flash means that your headphones are now turned on. Keep pressing the button until you see the red flash - this means the headphones are now ready to pair with your device.

Open the Bluetooth settings on your device and wait for Klar and the device to locate each other, then select Sudio Klar when it appears in the list. Once connected, the earphones will flash blue every 8 seconds or so.

Charging the battery

Jump to complete guide

Klar has one built-in battery in the headphones.

Klar is charged with a Micro-USB cable. It is recommended to use the Sudio Micro-USB cable that's included in the package, but the charging case may be compatible with third-party Micro-USB cables as well.

Klar - User guide - Connectivity & Pairing

Klar - User guide - Button controls

Klar has three control buttons that allow you to control certain features on your paired device.

Music/video playback

  • Press the middle button once to pause/play music.
  • Press (hold) the button labeled (+) for two seconds to go to the next song.
  • Press (hold) the button labeled (-) for two seconds to go back to the previous song.

Volume 

  • Press the button labeled (+) once to increase the volume and repeat it until you reach your preferred volume.
  • Press the button labeled (-) to decrease the volume and repeat it until you reach your preferred volume.

Incoming phone calls

  • Press the middle button once to accept or to end a phone call
  • Press (hold) the middle button for two seconds to reject an incoming phone call

Power

mceclip0.pngmceclip1.png

  • Press (hold) the middle button for five seconds until the blue light is blinking to power on your Klar. 
  • Press (hold) the middle button for five seconds until the blue turns off to power off your Klar. 

Active Noise Cancellation (ANC)

mceclip2.png

  • Press the button marked “ANC” to activate. The green light will indicate that ANC is on.

Siri

Siri needs to be activated on your device first. You can give the command "Hey Siri" through the earphone's microphone once Siri is activated.

Klar - User guide - Battery levels and management

Klar has one built-in battery in the headphones.

Charging and play times

The headphones can be used for approximately 30 hours on one charge.

The battery takes approximately 120 minutes to fully charge. Klar also supports quick charge, 10 minutes of charging gives 1 hour of playtime.

Charging methods

Klar can be charged with a Micro-USB cable included in the packaging. 

We recommend using the Sudio cable included in the package, however, other third-party Micro-USB cables may be compatible too.

Battery level indicators

When the battery level is extremely low, the LED light indicator on the headphones will start flashing red.

Battery life status will be indicated on your smartphone for iOS and most Android devices. Since phone manufacturers have various Android devices that work differently, you can also download various battery apps on the Google Play Store.

Klar - User guide - Download PDF version
Klar - Features - Active Noise Cancellation (ANC)

CjLBUADw.jpeg

Klar features two audio modes that let you decide what you want to hear - and what you don't want to hear. These two modes are called Active Noise Cancellation (ANC), and Normal (Off) mode.

The Active Noise Cancellation (ANC) mode in Klar reduces outside noise which allows you to fully immerse yourself in your own world.

How to switch between the modes

The earbuds are in Normal (Off) mode by default, where background noise is neither reduced nor amplified. By pressing the “ANC” marked button the green light will indicate that ANC is on. Press on the button again to turn ANC off.

How does Active Noise Cancellation (ANC) work?

The mechanics behind Active Noise Cancellation is in its name. The built-in microphones on Klar listen to the noise outside and inside the headphones while using the speaker to emit the same noise - but inverted - which reduces the outside noise nearly entirely. Klar uses Hybrid ANC technology, which is a combination of Feed Forward and Feedback ANC technology.

Klar - Features - Foldable Design

Z9CQn_NA.jpeg

Vegan leather pads and headband sits comfortably on your head, and when you're done, simply fold Sudio Klar to sit neatly in your bag.

Powered by Zendesk