Congratulations on receiving your new pair of Rem! Use this guide to learn about pairing Rem with your preferred device, charging the batteries, and restoring the earphones to their factory settings.
What's included in the box
- Rem wireless earphones and charging case
- Interchangeable ear tips in three different sizes: S, M & L
- Type-C USB-cable
- Owners manual
- Warnings Manual
Before getting started
⚠️ Sudio Rem is delivered with a protective film covering the charging connectors between the earbuds and charging case. The film needs to be removed in order for the earbuds to power on.
The earbuds will likely have some existing battery charge, however it is recommended to fully charge Rem before using it for the first time.
Turning Rem on or off
Rem powers up as soon as the earbuds are taken out of the charging case, as indicated by the LED lights on the earbuds.
Similarly, Rem is turned off when placing the earbuds back into the case.
You can also use the touch controls to power the earbuds on or off. Do this by holding the touch control for 5 seconds on either earbud.
Pairing with a device
Rem enters pairing mode when the earbuds are taken out of the charging case. Open the Bluetooth settings on your device and wait for Rem and the device to locate each other, then select Sudio Rem when it appears in the list.
Charging the batteries
There are three batteries in total on Rem; one in the charging case and one in each earbud.
The Rem earbuds charge their batteries automatically when placed inside the charging case, this is indicated by the LED lights on the earbuds. Make sure to first remove the protective film which is covering the charging connectors.
The Rem case is charged with a Type-C USB-cable. When the case is charging, you will see a light below the Sudio logo. It is recommended to use the Sudio Type-C USB-cable that's included in the package, but the charging case may be compatible with third-party Type-C USB-cables as well.
Comments
Article is closed for comments.