Fem - User guide - Connectivity & Pairing

Pairing Fem with a device

  1. Remove the Fem earbuds from the charging case and fit them inside your ears.
  2. Go into the Bluetooth settings on your device. The Fem earbud LED lights are flashing white and red while scanning for available devices. 
    • For iOS (iPhone), go to the Settings app and select Bluetooth.
    • For Android, go to the Settings app, then select Connections followed by Bluetooth.
    • For Windows 10, click on the Start button, select Settings followed by Devices, and then Bluetooth and other devices.
    • For macOS, go to the System Preferences app and select Bluetooth.
  3. Locate and select Sudio Fem in the Bluetooth list on your device.
  4. When paired you will hear the audio feedback 🔈 Pairing Successful.

If you would like to use only one of the earbuds, you can do so by just taking out the one you want to use from the charging case.

If Fem has previously been paired with your preferred device, simply remove the earbuds from the charging case and they will automatically connect, so long as Bluetooth is activated on the device and Fem has not been paired with a different device more recently. 

Device compatibility

Fem uses Bluetooth version 5.0 which is compatible with a wide range of Bluetooth devices. The paired device does not need to be the same version, but similar versions are more likely to maintain a strong connection. 

Signal interference

Some wireless devices may interfere with each others' signals, such as WiFi-routers, smartwatches, other Bluetooth devices, etc. If they operate within the same frequency, you may experience interference such as dropped sound and glitching. The easiest way to locate the cause of interference is by maintaining one connection between devices at the same time or take your Fem and connected device outdoors to see if the interference clears.

Fem can be up to a maximum of 10 meters (32 ft) from the paired device, but the connection may break if they are blocked by walls or similar objects. 

Pairing with multiple devices

Fem can remember up to 8 paired devices, which means that you don't have to follow the pairing steps every time you switch between devices. When Fem is turned on, it will automatically connect to the device most recently connected.

If you want to reconnect to one of your previously paired devices, disconnect Fem from the device you are currently using, and click "Sudio Fem" in the Bluetooth list of the next device you want to connect. Fem supports multi-pairing, but you can only play audio from one device at a time.

Was this article helpful?
16 out of 54 found this helpful



Article is closed for comments.