Congratulations on receiving your new B5! Use this guide to learn about pairing B5 with your preferred device, charging the battery, and restoring the headset to its factory settings.
What's included in the box
- B5 headset
- Magnetic charger
- Owners manual
- Warnings Manual
Turning B5 on or off
You can use the Power button to power the headset on or off. Do this by holding the button control for 2 seconds until you hear the audio feedback 🔈 On.
Similarly, hold the power button control for 2 seconds until you hear the audio feedback 🔈 Off.
Pairing with a device
Hold the Power button control for 2 seconds until you hear the audio feedback 🔈 On. Open the Bluetooth settings on your device and wait for B5 and the device to locate each other, then select Sudio B5 when it appears in the list. You will hear 🔈 Connected, confirming that the devices are paired with each other!
Charging the battery
There is one battery in total on B5.
The B5 headset is charged with a magnetic charger. When the headset is charging, you will see a light on the side of the headset.
Restoring B5 to its factory settings
If B5 is behaving unexpectedly or you simply wish to restore it to its original settings, turn the headset off and reset it by pressing the Power button on the headset for 5 seconds. You will hear 2 clicks, that means the reset is complete.
You may then proceed with pairing B5 again.
Comments
Article is closed for comments.