R3 - User guide - Factory reset

If R3 starts behaving unexpectedly, or if you wish to remove the connection between R3 and the connected device, you can perform a factory reset to restore your Sudio R3 to its original settings. This will reset the connection between your paired devices.

1. Turn off the R3 by pressing (holding) the button for 4 seconds until you hear "Off". 
2. Press (hold) on the button again for 10 seconds until the light blinks white twice and you hear 2 clicks. 
3. The reset is now complete. 

When you hear 🔈 Ready to pair, proceed to pair R3 with your Bluetooth device.