B2 - User guide - Factory reset

If B2 starts behaving unexpectedly, or if you wish to remove the connection between B2 and the connected device, you can perform a factory reset to restore your Sudio B2 to its original settings. This will reset the connection between your paired devices.

  1. Turn the B2 off by pressing on the plus (+) button for 2 seconds until you hear "Off". 
  2. Press and hold the plus (+) button on the headset for 5 seconds until you hear 2 clicks.
  3. The factory reset is now complete.

You can then proceed to pair the headset with your Bluetooth device.

Was this article helpful?
0 out of 3 found this helpful



Article is closed for comments.