K2 - User guide - Connectivity & Pairing

Pairing K2 with a device

  1. Hold the button on your K2 for 2 seconds. The white flash means that your headphones are now turned on and ready to pair. 
  2. Go into the Bluetooth settings on your device. 
    • For iOS (iPhone), go to the Settings app and select Bluetooth.
    • For Android, go to the Settings app, then select Connections followed by Bluetooth.
    • For Windows 10, click on the Start button, select Settings followed by Devices, and then Bluetooth and other devices.
    • For macOS, go to the System Preferences app and select Bluetooth.
  3. Locate and select Sudio K2 in the Bluetooth list on your device.
  4. Your Sudio K2 is now paired with your device.
  5. To turn off your headphones, hold the middle button for 5 seconds. The white light will turn off, this means the earphones are now turned off.

Device compatibility

K2 uses Bluetooth version 5.3 which is compatible with a wide range of Bluetooth devices. The paired device does not need to be the same version, but similar versions are more likely to maintain a strong connection. 

Signal interference

Some wireless devices may interfere with each others' signals, such as WiFi-routers, smartwatches, other Bluetooth devices, etc. If they operate within the same frequency, you may experience interference such as dropped sound and glitching. The easiest way to locate the cause of interference is by maintaining one connection between devices at the same time or taking your K2 and connected device outdoors to see if the interference clears.

K2 can be up to a maximum of 10 meters (49 ft) from the paired device, but the connection may break if they are blocked by walls or similar objects. 

Was this article helpful?
2 out of 3 found this helpful

Comments

0 comments

Article is closed for comments.